SPI USER control register 1
USR_DUMMY_CYCLELEN | The length in spi_clk cycles of dummy phase. The register value shall be (cycle_num-1). Can be configured in CONF state. |
MST_WFULL_ERR_END_EN | 1: SPI transfer is ended when SPI RX AFIFO wfull error is valid in GP-SPI master FD/HD-mode. 0: SPI transfer is not ended when SPI RX AFIFO wfull error is valid in GP-SPI master FD/HD-mode. |
CS_SETUP_TIME | (cycles+1) of prepare phase by spi clock this bits are combined with spi_cs_setup bit. Can be configured in CONF state. |
CS_HOLD_TIME | delay cycles of cs pin by spi clock this bits are combined with spi_cs_hold bit. Can be configured in CONF state. |
USR_ADDR_BITLEN | The length in bits of address phase. The register value shall be (bit_num-1). Can be configured in CONF state. |